Skip to product information
MITSUBISHI - RX70C4 - PLC Expansion Modules
RX70C4 MITSUBISHI

MITSUBISHI
Condition
 New Sealed

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
 New BAS

The product is an item that has never been used and has been sourced from an excess supplier.

  • Never used in a production environment, but it may have been powered on for testing.
  • The product may show slight superficial signs of handling, but no signs of use or damage.
  • It may or may not have the original packaging. If the original packaging is not available, the product will generally be packaged in aftermarket packaging or branded BAS.
  • Hardware, accessories, or instructions present in the factory new version of the product may be missing. The manufacturer's warranty may not apply.
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers.
  • Products may vary by country of origin and by language used on the packaging.
  • The packaging may contain markings not from the original manufacturer (OEM).
 New Fast Delivery

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
  • Faster shipping
Request information for RX70C4 MITSUBISHI

PRODUCT DESCRIPTION

MITSUBISHI RX70C4 - SCARA Robot

The MITSUBISHI RX70C4 is a 4-axis SCARA (Selective Compliance Assembly Robot Arm) industrial robot engineered for high-speed, high-precision material handling and assembly operations. This system integrates with MELSEC controllers, leveraging advanced motion control algorithms to achieve rapid cycle times and repeatable positioning in automated manufacturing environments. Target applications include electronics assembly, pick-and-place, and packaging.

Technical Specifications:

  • SERIES/FAMILY: MELFA RX Series
  • COMPONENT TYPE: SCARA Robot
  • ELECTRICAL SPECS:
    • NOMINAL VOLTAGE: 200-240VAC, 3-Phase
    • FREQUENCY: 50/60 Hz
    • POWER CONSUMPTION: Typically 1.5 - 3.0 kVA (Robot + Controller)
  • MECHANICAL/PHYSICAL:
    • AXES: 4
    • PAYLOAD CAPACITY: 70 kg
    • HORIZONTAL REACH: Approximately 850 mm (standard configuration for RX70C)
    • VERTICAL STROKE: Approximately 200-300 mm
    • REPEATABILITY: +/- 0.02 mm
    • MOUNTING: Floor or Ceiling
  • INTERFACE/CONTROL:
    • CONTROLLER TYPE: Dedicated MELFA Robot Controller (e.g., CR750/CR800 series)
    • PROGRAMMING LANGUAGE: MELFA-BASIC V
    • COMMUNICATION PROTOCOLS: Ethernet, CC-Link IE Field Basic, CC-Link, PROFINET/EtherNet/IP (via optional interface cards)
    • I/O: Digital I/O for peripheral device control
    • FEEDBACK: Absolute encoders on all axes
  • ENVIRONMENTAL/MOUNTING:
    • IP RATING: IP20 (main body), IP40 (wrist) - typical for standard industrial environments
    • COOLING METHOD: Natural convection/Fan-assisted (controller)
    • OPERATING TEMPERATURE: 0 to 40 degrees Celsius
  • COMPATIBILITY/APPLICATION:
    • TARGET SYSTEMS: Automated assembly lines, material handling cells, machine tending, inspection systems
    • SPECIFIC MACHINE TYPES: Electronics manufacturing, automotive component assembly, packaging lines, medical device production

1 year warranty

HS CODE

84795000

DELIVERY TIME

10 working days

Price excluding VAT

Return conditions

You can return the purchased product according to the Terms and Conditions

Warranty

Automantion Service Srl is NOT an official distributor of the manufacturer. The manufacturer's warranty does not apply. Terms and conditions

Do you need help or assistance with this item? Do you want to sell your stock?

web@bautomationservice.com  
+39 030/681340

You might be interested in ...