DESCRIPCIÓN DEL PRODUCTO
SCHNEIDER ELECTRIC SMT1500IC - Integrated Stepper Motor with Controller
The SCHNEIDER ELECTRIC SMT1500IC is an integrated stepper motor from the Lexium MDrive SMT series, combining a motor, drive, and controller into a single, compact unit. This device is engineered for precise open-loop or closed-loop positioning applications requiring distributed control and reduced wiring complexity. It is suitable for use in material handling systems, dispensing equipment, packaging machinery, and laboratory automation.
Technical Specifications:
- SERIES/FAMILY: Lexium MDrive SMT Series
- COMPONENT TYPE: Integrated Stepper Motor with Controller
- ELECTRICAL SPECS:
- NOMINAL VOLTAGE: 12-75 VDC (Operating Range)
- NOMINAL CURRENT: Varies by load and speed, typically up to 2.5A RMS per phase
- POWER OUTPUT: Not directly specified by code provides precise motion control
- MECHANICAL/PHYSICAL:
- HOLDING TORQUE: Approximately 1.5 - 2.5 Nm (typical for this class)
- STEP ANGLE: 1.8 degrees (200 steps/revolution)
- MICROSTEP RESOLUTION: Up to 51,200 steps/revolution
- SHAFT TYPE: Standard round or D-cut shaft
- FORM FACTOR: Integrated motor with rear-mounted electronics housing
- INTERFACE/CONTROL:
- COMMUNICATION PROTOCOLS: Modbus RTU, CANopen (standard for IC models)
- CONTROL MODES: Position, Velocity, Torque
- FEEDBACK: Optional encoder for closed-loop operation (if equipped)
- I/O: Digital inputs and outputs for control and status
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP50 (motor body), IP20 (electronics housing)
- COOLING METHOD: Natural convection
- MOUNTING STYLE: NEMA standard flange mounting (e.g., NEMA 23 or NEMA 34 equivalent)
- COMPATIBILITY/APPLICATION: Precision positioning systems, automated assembly, dispensing, packaging, material handling, robotics, laboratory equipment.
