OPIS PRODUKTU
SCHNEIDER ELECTRIC VDM01D10AL14 - Integrated Stepper Motor with Drive
The SCHNEIDER ELECTRIC VDM01D10AL14 is an integrated stepper motor and drive unit from the Lexium MDrive series, engineered for compact, decentralized motion control. This unit combines a NEMA 17 stepper motor with a fully programmable microstepping drive, utilizing RS-422/485 serial communication for precise command and control. It is designed for accurate positioning in industrial automation, laboratory equipment, and material handling systems where space optimization and simplified wiring are critical.
Technical Specifications:
- SERIES/FAMILY: Lexium MDrive
- COMPONENT TYPE: Integrated Stepper Motor with Drive
- ELECTRICAL SPECS:
- NOMINAL VOLTAGE: 12-48 VDC
- MOTOR PHASE: 2-Phase Stepper
- TYPICAL POWER OUTPUT: 10-50 W (dependent on operating conditions and load)
- MECHANICAL/PHYSICAL:
- FRAME SIZE: NEMA 17 (42 mm square)
- HOLDING TORQUE: Approximately 0.25 - 0.4 Nm (based on '10' stack length)
- MAXIMUM SPEED: Up to 3000 RPM (no-load, dependent on microstepping configuration)
- SHAFT TYPE: Standard D-cut shaft
- STEP ANGLE: 1.8 degrees (200 steps/revolution)
- MICROSTEP RESOLUTION: Up to 256 microsteps/full step (51,200 steps/revolution)
- INTERFACE/CONTROL:
- COMMUNICATION PROTOCOL: RS-422/485 Serial (MCode or similar command language)
- I/O: General Purpose Digital I/O (specific count dependent on firmware version)
- FEEDBACK: Open-loop control (no integrated encoder)
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (typical for internal components, connector dependent)
- COOLING METHOD: Convection Cooled
- MOUNTING STYLE: Front face mount (NEMA standard)
- COMPATIBILITY/APPLICATION:
- TARGET SYSTEMS: Industrial automation, laboratory automation, medical devices, packaging machinery, material handling, light-duty CNC equipment
- CONTROL ARCHITECTURE: Decentralized motion control, point-to-point positioning, velocity control
