OPIS PRODUKTU
SCHNEIDER ELECTRIC MTN644592 - Modular Contactor
The SCHNEIDER ELECTRIC MTN644592 is a 4-pole modular contactor from the Acti 9 iCT series, engineered for the remote control of electrical circuits in commercial and industrial installations. This device facilitates the switching of resistive loads, lighting circuits, heating systems, and small motor applications, integrating seamlessly into DIN rail mounted distribution boards. It provides reliable electrical isolation and control for non-critical loads, adhering to established industrial standards for safety and performance.
Technical Specifications:
- SERIES/FAMILY: Acti 9 iCT
- COMPONENT TYPE: Modular Contactor
- ELECTRICAL SPECS:
- RATED OPERATIONAL CURRENT (Ie): 25A (AC-1 category)
- NUMBER OF POLES: 4P (4 Normally Open contacts)
- COIL CONTROL VOLTAGE (Uc): 230/240VAC at 50/60Hz
- RATED OPERATIONAL VOLTAGE (Ue): 250VAC (single phase), 400VAC (three phase)
- RATED INSULATION VOLTAGE (Ui): 500VAC
- RATED IMPULSE WITHSTAND VOLTAGE (Uimp): 4kV
- MAXIMUM SWITCHED POWER (AC-3, 400V): 18.5 kW (for 3-phase motors)
- MECHANICAL/PHYSICAL:
- MOUNTING: DIN Rail
- WIDTH: 3 Modules (54mm)
- ELECTRICAL DURABILITY: 100,000 cycles (AC-1)
- MECHANICAL DURABILITY: 1,000,000 cycles
- INTERFACE/CONTROL:
- CONTROL TYPE: Remote electrical control via coil energization
- AUXILIARY CONTACTS: Not integrated
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (terminals), IP40 (front face in enclosure)
- OPERATING TEMPERATURE: -5 to 60 degrees Celsius
- STORAGE TEMPERATURE: -40 to 70 degrees Celsius
- MOUNTING POSITION: Any
- COMPATIBILITY/APPLICATION:
- TARGET APPLICATIONS: Lighting control, heating systems, ventilation systems, non-inductive loads, small motor control
- STANDARDS COMPLIANCE: IEC/EN 61095, IEC/EN 60947-4-1