OPIS PRODUKTU
SCHNEIDER ELECTRIC RMPT23BD - Lexium MDrive Pulse/Direction Integrated Stepper Motor
This SCHNEIDER ELECTRIC RMPT23BD unit is an integrated stepper motor from the Lexium MDrive series, combining a NEMA 23 stepper motor, microstepping drive, and controller into a single compact device. It is engineered for precise open-loop or closed-loop (with optional encoder) motion control in industrial automation applications requiring step and direction command inputs, such as material handling, packaging machinery, and laboratory automation. The integrated design minimizes wiring and simplifies system architecture.
Technical Specifications:
- SERIES/FAMILY: Lexium MDrive Pulse/Direction
- COMPONENT TYPE: Integrated Stepper Motor with Drive
- ELECTRICAL SPECS:
- INPUT VOLTAGE: 12-75 VDC (Nominal operating range 24-48 VDC)
- PHASE CURRENT: Up to 3.5A RMS (Configurable via software)
- POWER DISSIPATION: Dependent on load, speed, and operating conditions
- MECHANICAL/PHYSICAL:
- FRAME SIZE: NEMA 23
- HOLDING TORQUE: Approximately 1.0 - 1.5 Nm (140 - 210 oz-in)
- MAXIMUM SPEED: Up to 2000 RPM (Application dependent, with torque derating)
- SHAFT TYPE: Standard D-cut shaft (typically 6.35mm / 0.25 inch diameter)
- ROTOR INERTIA: Typical for NEMA 23 stepper motors
- INTERFACE/CONTROL:
- CONTROL INPUTS: Pulse and Direction (Step/Dir)
- MICROSTEP RESOLUTION: Configurable, up to 51,200 steps/revolution (256 microsteps/full step)
- DIGITAL I/O: Configurable general-purpose inputs and outputs (e.g., 4 inputs, 2 outputs)
- FEEDBACK: Optional external encoder input for closed-loop operation or position verification
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (Electronics housing), IP40 (Motor body)
- COOLING METHOD: Convection cooled
- MOUNTING STYLE: NEMA 23 standard flange mount
- OPERATING TEMPERATURE: 0 to 85 degrees C (Non-condensing)
- COMPATIBILITY/APPLICATION:
- TARGET SYSTEMS: PLC-based control systems, dedicated motion controllers, HMI systems
- MACHINE TYPES: Conveyors, indexing tables, pick-and-place units, dispensing equipment, automated test stands, small CNC machines
