DESCRIZIONE PRODOTTO
SCHNEIDER ELECTRIC 48975 - TeSys D Contactor
This electromechanical switching device from the TeSys D series is engineered for control of three-phase asynchronous motors and resistive loads up to 9A AC-3. It integrates a 24V DC control coil for direct interface with low-voltage control circuits, facilitating consistent operation in industrial automation, HVAC, and material handling applications. The unit supports direct-on-line motor starting and load isolation, adhering to international IEC standards for industrial control gear.
Technical Specifications:
- SERIES/FAMILY: TeSys D
- COMPONENT TYPE: Contactor
- ELECTRICAL SPECS:
- NOMINAL OPERATIONAL VOLTAGE (Ue): Up to 690V AC (IEC), 600V AC (UL/CSA)
- NOMINAL OPERATIONAL CURRENT (AC-3): 9A at <= 440V AC
- NOMINAL OPERATIONAL CURRENT (AC-1): 25A at <= 60 degrees C, <= 690V AC
- NUMBER OF POLES: 3P
- MAIN CONTACT CONFIGURATION: 3 NO
- CONTROL CIRCUIT VOLTAGE: 24V DC
- UTILIZATION CATEGORY: AC-3 (Motor control), AC-1 (Resistive loads)
- RATED IMPULSE WITHSTAND VOLTAGE (Uimp): 6 kV
- RATED INSULATION VOLTAGE (Ui): 690V AC (IEC), 600V AC (UL/CSA)
- MECHANICAL/PHYSICAL:
- FRAME SIZE: Compact
- TERMINALS: Screw clamp terminals for power and control circuits
- INTERFACE/CONTROL:
- CONTROL TYPE: Electromechanical coil
- COIL CONSUMPTION (HOLDING): 0.1 W at 24V DC
- COIL CONSUMPTION (INRUSH): 2.4 W at 24V DC
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (Terminals)
- OPERATING TEMPERATURE: -5 to 60 degrees C
- STORAGE TEMPERATURE: -60 to 80 degrees C
- MOUNTING STYLE: 35mm DIN rail or panel mounting via screws
- COMPATIBILITY/APPLICATION:
- TARGET SYSTEMS: Direct-on-line motor starters, resistive load switching, industrial control panels, HVAC systems, pumping stations, conveyor systems, general industrial machinery.
- STANDARDS COMPLIANCE: IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, CCC, EAC, Marine