DESCRIZIONE PRODOTTO
SCHNEIDER ELECTRIC VDM01D22AA00 - Integrated Stepper Motor
The SCHNEIDER ELECTRIC VDM01D22AA00 is an integrated stepper motor from the Lexium MDrive series, combining a NEMA 17 frame stepper motor, a microstepping drive, and a programmable motion controller into a single compact unit. This component is engineered for precise open-loop or closed-loop positioning applications requiring distributed intelligence, such as material handling, laboratory automation, and small-scale robotics, reducing wiring complexity and panel space. It provides direct control via digital I/O and serial communication for standalone or coordinated motion tasks.
Technical Specifications:
- SERIES/FAMILY: Lexium MDrive
- COMPONENT TYPE: Integrated Stepper Motor with Drive and Controller
- ELECTRICAL SPECS:
- INPUT VOLTAGE: 12-48VDC (Nominal Operating Range)
- PHASE CURRENT: 2.2A (RMS per phase, typical)
- POWER OUTPUT: Dependent on operating speed and load typically 10-50W continuous
- MECHANICAL/PHYSICAL:
- FRAME SIZE: NEMA 17
- HOLDING TORQUE: 0.25 - 0.45 Nm (Typical, dependent on winding and current)
- SHAFT TYPE: Single-ended, standard round shaft
- STEP ANGLE: 1.8 degrees (200 steps/revolution, typical)
- MICROSTEP RESOLUTION: Up to 51,200 steps/revolution (256 microsteps/full step, typical)
- INTERFACE/CONTROL:
- COMMUNICATION PROTOCOL: RS-422/485 Serial (for programming and control)
- DIGITAL I/O: Multiple configurable inputs and outputs (e.g., Home, Limit, Run/Stop)
- FEEDBACK: Internal position feedback for enhanced stepper performance (closed-loop stepper capability)
- PROGRAMMING: Onboard motion controller with programmable instruction set
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (Motor body, typical connector dependent)
- COOLING METHOD: Convection cooled
- MOUNTING STYLE: NEMA 17 standard face mount
- COMPATIBILITY/APPLICATION: Small-scale automation, laboratory equipment, dispensing systems, pick-and-place machines, indexing tables, valve control.
