DESCRIZIONE PRODOTTO
SCHNEIDER ELECTRIC LC2D65ABBE - Reversing Contactor
This device is a TeSys D series reversing contactor designed for industrial motor control applications. It facilitates the directional control of three-phase asynchronous motors by integrating two mechanically and electrically interlocked contactors. The unit is suitable for switching resistive and inductive loads in automation systems, material handling, and pumping stations, operating via a 24VAC control circuit.
Technical Specifications:
- SERIES/FAMILY: TeSys D
- COMPONENT TYPE: Reversing Contactor
- ELECTRICAL SPECS:
- RATED OPERATIONAL CURRENT (AC-3): 65A at <= 440V
- COIL VOLTAGE: 24VAC at 50/60Hz
- NUMBER OF POLES: 3P
- RATED OPERATIONAL VOLTAGE (Ue): Up to 690VAC
- RATED INSULATION VOLTAGE (Ui): 690VAC
- RATED IMPULSE WITHSTAND VOLTAGE (Uimp): 6kV
- TYPICAL MOTOR POWER (AC-3): 30kW at 400V, 37kW at 440V, 45kW at 500V, 45kW at 660-690V
- MECHANICAL/PHYSICAL:
- AUXILIARY CONTACTS: 1 NO + 1 NC (per contactor, for control and feedback)
- INTERLOCKING: Integrated mechanical and electrical interlocking
- FORM FACTOR: Open type, pre-assembled reversing unit
- INTERFACE/CONTROL:
- CONTROL TERMINALS: Screw clamp terminals for coil connection
- POWER TERMINALS: Screw clamp terminals for power circuit
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (terminals protected against direct finger contact)
- MOUNTING: 35mm DIN rail or screw mounting
- OPERATING TEMPERATURE: -5 to 60°C
- COMPATIBILITY/APPLICATION: Three-phase asynchronous motor control, directional switching, material handling systems, pumping applications, HVAC systems, general industrial machinery.
