DESCRIZIONE PRODOTTO
SCHNEIDER ELECTRIC MTN630960 - Contactor
This device is a modular contactor from the SCHNEIDER ELECTRIC Acti 9 iCT series, engineered for remote control and switching of electrical loads in industrial and commercial building management systems. It facilitates the control of lighting circuits, heating elements, ventilation systems, and non-critical motor loads through an electromechanical switching mechanism. The unit is designed for integration into electrical distribution boards and control panels via DIN rail mounting.
Technical Specifications:
- SERIES/FAMILY: Acti 9 iCT
- COMPONENT TYPE: Modular Contactor
- ELECTRICAL SPECS:
- NOMINAL OPERATIONAL CURRENT: 63 A (AC-1, AC-7a)
- NUMBER OF POLES: 4P (4 Normally Open)
- CONTROL CIRCUIT VOLTAGE: 230-240 VAC at 50/60 Hz
- RATED OPERATIONAL VOLTAGE: 400 V AC 50/60 Hz
- UTILIZATION CATEGORY: AC-1, AC-7a, AC-7b
- RATED IMPULSE WITHSTAND VOLTAGE (Uimp): 4 kV
- OPERATIONAL FREQUENCY: 50/60 Hz
- MECHANICAL/PHYSICAL:
- MOUNTING: DIN Rail (35 mm)
- MODULAR WIDTH: 4 modules (36 mm total width)
- TERMINALS: Tunnel type terminals for rigid and flexible conductors
- ELECTRICAL DURABILITY: 100,000 cycles (AC-1)
- MECHANICAL DURABILITY: 1,000,000 cycles
- INTERFACE/CONTROL:
- CONTROL TYPE: Electromechanical coil actuation
- INDICATORS: Mechanical position indicator (ON/OFF)
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (terminals), IP40 (front face in enclosure)
- OPERATING TEMPERATURE: -5 to 60 degrees C
- STORAGE TEMPERATURE: -40 to 70 degrees C
- POLLUTION DEGREE: 2
- COOLING METHOD: Natural convection
- COMPATIBILITY/APPLICATION:
- TARGET SYSTEMS: Building Management Systems (BMS), HVAC control, lighting control, heating control, industrial control panels, non-critical motor control.
- STANDARDS: IEC 61095, EN 61095
