ОПИСАНИЕ ПРОДУКТА
SCHNEIDER ELECTRIC VY1F32AB1001 - Integrated Servo Motor and Drive
This unit is an integrated servo motor and drive from the SCHNEIDER ELECTRIC Lexium 32i series, designed for high-performance motion control applications. It combines a permanent magnet synchronous motor with a compact servo drive, providing a single-cable solution for precise positioning, speed, and torque control in industrial automation systems. This integrated solution is suitable for applications requiring compact design and distributed intelligence, such as material handling, packaging machinery, and automated assembly lines.
Technical Specifications:
- SERIES/FAMILY: Lexium 32i
- COMPONENT TYPE: Integrated Servo Motor and Drive
- ELECTRICAL SPECS:
- NOMINAL POWER: 1.00 kW
- NOMINAL VOLTAGE: 200-240VAC (Single-phase or Three-phase) or 380-480VAC (Three-phase)
- NOMINAL CURRENT: Varies by voltage and load, typically 2-3A RMS for 1.00 kW at 400V, or 4-6A RMS at 230V
- PHASE: Single-phase or Three-phase (depending on specific variant)
- FREQUENCY: 50/60 Hz
- MECHANICAL/PHYSICAL:
- NOMINAL TORQUE: Approximately 3.2 Nm to 4.8 Nm (continuous, typical for 1.00 kW)
- PEAK TORQUE: Up to 3 times nominal torque
- NOMINAL SPEED: Approximately 3000 RPM
- SHAFT TYPE: Keyed shaft (typical)
- FORM FACTOR: Integrated motor and drive unit, flange mount
- INTERFACE/CONTROL:
- COMMUNICATION PROTOCOL: CANopen (standard), EtherCAT, PROFINET, Modbus TCP, Sercos III (optional, depending on specific variant)
- FEEDBACK: Integrated Absolute Encoder (single-turn or multi-turn, typically 16-23 bits resolution)
- I/O: Digital inputs/outputs for control and status
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP65 (motor section, providing protection against dust and water jets), IP20 (drive section, typically for internal cabinet mounting or electrical connection area)
- COOLING METHOD: Natural convection (motor), forced air (drive, if applicable)
- MOUNTING STYLE: Flange mount (motor section)
- COMPATIBILITY/APPLICATION: Packaging machinery, material handling systems, printing equipment, textile machines, automated assembly, robotics, general industrial automation requiring compact and precise motion control.