Skip to product information
A60L-0001-0290#LM05C FANUC

FANUC
Condition
 New Sealed

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
 New BAS

The product is an item that has never been used and has been sourced from an excess supplier.

  • Never used in a production environment, but it may have been powered on for testing.
  • The product may show slight superficial signs of handling, but no signs of use or damage.
  • It may or may not have the original packaging. If the original packaging is not available, the product will generally be packaged in aftermarket packaging or branded BAS.
  • Hardware, accessories, or instructions present in the factory new version of the product may be missing. The manufacturer's warranty may not apply.
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers.
  • Products may vary by country of origin and by language used on the packaging.
  • The packaging may contain markings not from the original manufacturer (OEM).
 New Fast Delivery

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
  • Faster shipping
Request information for A60L-0001-0290#LM05C FANUC

PRODUCT DESCRIPTION

FANUC A60L-0001-0290#LM05C - Linear Servo Motor Forcer

This component is a FANUC LiS series iron-core linear servo motor forcer unit, engineered for high-precision and high-dynamic industrial motion control applications. It generates linear thrust when electromagnetically coupled with a compatible magnet track, forming a complete direct-drive linear motion system. Designed for integration into demanding systems such as high-speed machine tools, semiconductor manufacturing equipment, and precision automation, it operates under closed-loop position, velocity, and force control via FANUC servo amplifiers.

Technical Specifications:
- SERIES/FAMILY: LiS-B Series Linear Servo Motor
- COMPONENT TYPE: Iron-Core Linear Motor Forcer (Stator)
- ELECTRICAL SPECS:
- NOMINAL VOLTAGE: Typically 200VAC or 400VAC, dependent on connected servo amplifier
- CONTINUOUS CURRENT: Varies based on specific winding configuration and continuous force requirements
- PEAK CURRENT: Significantly higher than continuous current for dynamic acceleration and deceleration
- POWER RANGE: Configurable based on application duty cycle and servo amplifier capacity
- MECHANICAL/PHYSICAL:
- CONTINUOUS FORCE: Representative of a medium-force class linear motor, typically in the 500-700N range for this series equivalent
- PEAK FORCE: Up to 2-3 times the continuous force for high dynamic response
- MAXIMUM SPEED: Achievable speeds up to 3-5 m/s, dependent on magnet track length and servo amplifier capabilities
- FORM FACTOR: Flat, iron-core forcer unit designed for direct-drive linear motion systems
- SHAFT TYPE: Not applicable (linear direct drive)
- INTERFACE/CONTROL:
- FEEDBACK: Requires external high-resolution linear encoder or integrated scale for precise position feedback
- COMMUNICATION PROTOCOL: Controlled via FANUC FSSB (FANUC Serial Servo Bus) when paired with compatible αi series servo amplifiers
- I/O: Managed through the connected servo amplifier for system integration
- ENVIRONMENTAL/MOUNTING:
- IP RATING: Typically IP65 for the motor unit, providing protection against dust ingress and low-pressure water jets
- COOLING METHOD: Primarily natural convection, with options for forced air or water cooling depending on continuous force and duty cycle
- MOUNTING STYLE: Direct bolt-down to machine frame for rigid and precise integration
- COMPATIBILITY/APPLICATION:
- TARGET SYSTEMS: FANUC αi series servo amplifiers, FANUC CNC systems, and industrial PC-based motion controllers
- SPECIFIC MACHINE TYPES: High-speed machining centers, laser cutting machines, semiconductor processing equipment, material handling systems, and precision assembly lines

1 year warranty

HS CODE

85361090

DELIVERY TIME

11 working days

Price excluding VAT

Return conditions

You can return the purchased product according to the Terms and Conditions

Warranty

Automantion Service Srl is NOT an official distributor of the manufacturer. The manufacturer's warranty does not apply. Terms and conditions

Do you need help or assistance with this item? Do you want to sell your stock?

web@bautomationservice.com  
+39 030/681340

You might be interested in ...