Skip to product information
SIEMENS - 1FW6160-8VB10-1JC3 - Torque Motors
1FW6160-8VB10-1JC3 SIEMENS

SIEMENS
Condition
 New Sealed

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
 New BAS

The product is an item that has never been used and has been sourced from an excess supplier.

  • Never used in a production environment, but it may have been powered on for testing.
  • The product may show slight superficial signs of handling, but no signs of use or damage.
  • It may or may not have the original packaging. If the original packaging is not available, the product will generally be packaged in aftermarket packaging or branded BAS.
  • Hardware, accessories, or instructions present in the factory new version of the product may be missing. The manufacturer's warranty may not apply.
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers.
  • Products may vary by country of origin and by language used on the packaging.
  • The packaging may contain markings not from the original manufacturer (OEM).
 New Fast Delivery

The product is an item that has never been used and was obtained through a surplus supplier.

  • Never used in a production environment, but it may have been powered on for testing
  • No visible signs of handling, use, or damage
  • Includes the original packaging, if applicable
  • May or may not have the original manufacturer's seal on the box. The original manufacturer's warranty may not be applicable.
  • Includes all hardware and accessories present in the factory new version of the product
  • May or may not include the instructions present in the factory new version of the product
  • The product may have older date or serial codes compared to those available directly from the manufacturer or authorized retailers
  • Products may vary by country of origin and by language used on the packaging
  • The product packaging may show signs of shelf wear
  • Faster shipping
Request information for 1FW6160-8VB10-1JC3 SIEMENS

PRODUCT DESCRIPTION

SIEMENS 1FW6160-8VB10-1JC3 - SIMOTICS S-1FW6 Built-in Synchronous Torque Motor

This SIEMENS SIMOTICS S-1FW6 series built-in synchronous torque motor is engineered for direct integration into high-performance industrial machinery. It provides precise, high-dynamic motion control without mechanical transmission elements, utilizing a frameless design for optimized space utilization and stiffness. Designed for demanding applications such as machine tools, robotics, printing presses, and specialized automation, it integrates seamlessly with SINAMICS S120 drive systems via a DRIVE-CLiQ interface.

Technical Specifications:

  • SERIES/FAMILY: SIMOTICS S-1FW6
  • COMPONENT TYPE: Synchronous Built-in Torque Motor (Frameless)
  • ELECTRICAL SPECS:
    • NOMINAL VOLTAGE: 400VAC (3-phase, typical for SINAMICS S120 integration)
    • RATED POWER: Specific to winding '8VB10', typically ranging from 5 kW to 20 kW for this frame size.
    • RATED CURRENT: Specific to winding '8VB10' and operating conditions.
    • NOMINAL FREQUENCY: Dependent on operating speed and pole pair count.
  • MECHANICAL/PHYSICAL:
    • STATOR OUTER DIAMETER: 160 mm
    • RATED TORQUE: Specific to winding '8VB10', typically ranging from 100 Nm to 300 Nm continuous.
    • PEAK TORQUE: Significantly higher than rated torque, specific to winding '8VB10'.
    • RATED SPEED: Specific to winding '8VB10', typically 100 RPM to 1000 RPM.
    • ROTOR TYPE: Permanent magnet synchronous rotor (supplied separately for integration).
    • SHAFT TYPE: Hollow shaft for direct integration (rotor design).
    • FORM FACTOR: Frameless stator and rotor components for direct machine integration.
  • INTERFACE/CONTROL:
    • FEEDBACK SYSTEM: Absolute Multi-turn Encoder
    • COMMUNICATION PROTOCOL: DRIVE-CLiQ (for encoder feedback and motor identification)
    • ELECTRICAL CONNECTION: Power and signal connections via integrated cables or terminal box, specific to 'C3' variant.
  • ENVIRONMENTAL/MOUNTING:
    • IP RATING: IP20 (for motor unit, protection provided by machine enclosure)
    • COOLING METHOD: Liquid cooling (typical for high-performance 1FW6 motors of this size)
    • MOUNTING STYLE: Direct integration of stator and rotor into machine mechanics.
  • COMPATIBILITY/APPLICATION:
    • DRIVE SYSTEM COMPATIBILITY: SINAMICS S120 drive system
    • TARGET APPLICATIONS: Machine tools (e.g., milling, turning), robotics, printing machines, textile machinery, packaging equipment, direct-drive rotary tables, and high-precision positioning systems.

1 year warranty

HS CODE

85015290

DELIVERY TIME

11 working days

Price excluding VAT

Return conditions

You can return the purchased product according to the Terms and Conditions

Warranty

Automantion Service Srl is NOT an official distributor of the manufacturer. The manufacturer's warranty does not apply. Terms and conditions

Do you need help or assistance with this item? Do you want to sell your stock?

web@bautomationservice.com  
+39 030/681340

You might be interested in ...