DESCRIZIONE PRODOTTO
SCHNEIDER ELECTRIC METSECT5CYL1 - Current Transformer
This device is a solid-core current transformer from the SCHNEIDER ELECTRIC METSECT series, engineered for precise current measurement in industrial and commercial low-voltage electrical distribution systems. It provides a scaled-down secondary current signal proportional to the primary current, enabling accurate energy monitoring, power quality analysis, and protection relay integration. The cylindrical form factor facilitates direct conductor pass-through for non-intrusive current sensing in panel-mounted applications.
Technical Specifications:
- SERIES/FAMILY: METSECT Series
- COMPONENT TYPE: Solid-Core Current Transformer
- ELECTRICAL SPECS:
- PRIMARY CURRENT: Specific to model variant within the '5' series (typically 50A to 600A range)
- SECONDARY CURRENT: 1A
- RATED FREQUENCY: 50/60 Hz
- INSULATION VOLTAGE: Up to 720VAC
- ACCURACY CLASS: Class 0.5, 1, or 3 (dependent on specific variant and burden)
- RATED BURDEN: Typically 2.5VA to 10VA (dependent on specific variant and accuracy class)
- MECHANICAL/PHYSICAL:
- FORM FACTOR: Cylindrical, ring-type
- APERTURE DIAMETER: Varies by primary current rating and specific model (e.g., 21mm to 50mm)
- CONDUCTOR TYPE: Single insulated cable or busbar pass-through
- INTERFACE/CONTROL:
- OUTPUT: Analog current signal (1A)
- CONNECTION: Screw terminals for secondary wiring
- ENVIRONMENTAL/MOUNTING:
- IP RATING: IP20 (typical for indoor panel mounting)
- COOLING METHOD: Natural convection
- MOUNTING STYLE: Panel mounting via screws optional DIN rail adapter available
- OPERATING TEMPERATURE: -5°C to +50°C (typical)
- COMPATIBILITY/APPLICATION: Energy meters, power quality meters, protection relays, industrial control panels, building management systems, sub-metering applications.
